System Gemini Free Rifle Butt Plate is the
world’s most adjustable, with over 550,000 permutations;
it offers customisation at production prices. It is
the only butt plate with mid section articulation giving
the ability to twist asymmetrically. The shooter can
key the butt plate so finely into the shoulder, that
optimum recoil characteristics are obtained, virtually
eliminating the need to reposition the butt after each
shot. Machined from aluminium alloy.
There is a wide choice of colours.
Not all colours are immediately available from stock
but can be ordered.
AKTIV
Free Rifle Butt Plate
The World’s Best Just Got Better!!
HPS have now produced a new heel hinge cantilever (note
the extra cantilever section inserted in the heel plate)
which gives the top of the butt plate extra curvature
for an even more secure fit.
There is a wide choice of colours.
Not all colours are immediately available from stock
but can be ordered.
Both the Free Rifle Butt Plate and
the AKTIV Free Rifle Butt Plate are
available in 3P Sets (3 Positional - for Prone, Standing,
and Kneeling Shooting) consisting of 1 carrier plate
and one pair of rods and three butt assemblies to fit
the carrier in order to reduce cost and the weight of
your kit bag!
Designed to fit Anschütz 14, 18, 19 and 20, Walther
KK 200 series and Feinwerkbau 2600 series rifles both
the Free Rifle Butt Plate and AKTIV Free Rifle Butt
Plate will also fit many other makes of rifles. Contact
us for details.
3P,
2P and 1P Sets
3P Set
2P Set
1P Set
Extra Long Raiser Bar
Option of an extra
long raiser bar which fits all Free Rifle Buttplate versions.
This extends the vertical travel of the buttplate in the
Guide Plate by 54 mm.
Offset Adaptor Plate
This plate fits between
the Carrier Plate and the Raiser Bar and allows the whole
buttplate to be offset by an additional 18 mm. Does not
fit the FWB versions.
Heel Hinge
Cantilever
Available as an upgrade to the existing System Gemini
Free Rifle Butt Plate, the Heel Hinge Cantilever
will give further contact to the upper part of the shoulder
enabling a closer fit to the shoulder shape. The small
screw on the rear of the Cantilever prevents the plate
from folding flat. This will fit all System Gemini Free
Rifle Butt Plates from the earliest model. Several Cantilevers
may be fitted in tandem if required.
Heel Plate
Assembly
For those that feel that a hook is not necessary for
prone shooting, the Heel Plate Assembly,
normally used at the top of the Free Rifle Butt Plate,
can also be fitted to the bottom of the plate in place
of the hook assembly. The Cantilever may also be fitted
if required.
AKTIV
Standard Rifle Butt Plate
The System Gemini AKTIV Standard Rifle Butt
Plate designed in 1992 specifically to give
the standard rifle shooter as much support and adjustment
as possible. This means there are less possible errors
in repositioning the butt after each shot. Shooters
with either large or small shoulders can feel confident
with the butt placement. Machined from aluminium alloy.
The mounting arrangement allows 15° of lateral
movement to position the butt accurately into the
shoulder; the mounting rod is universally adaptable
to any rifle.
The unique ‘grip lock’ profile makes
the shoulder fold of the jacket grip the butt plate,
thus giving better support.
The adaptor plate shown on the right is available
as an optional extra to permit fitment to other types
of rifle stocks.
The AKTIV Standard Rifle Butt Plate will fit most
standard and air rifles available and has
been upgraded to allow heavy-duty use on Fullbore
Rifles.
There is a wide choice of colours.
Not all colours are immediately available from stock
but can be ordered.
Standard Rifle Butt Spacers
For AKTIV-Standard
Rifle Butt Plates the System Gemini Butt Spacers
are designed to fit most rifle configurations, giving
5mm or 10mm increments.
For Anschütz Stocks the System Gemini Anschütz
Standard Rifle Butt Adaptors allow the System Gemini
Standard Rifle Butt Plate to be mounted at 90 degrees
to line of sight.
