Search
Filters
Close

GRS Laminate Rifle Stocks

Offering GRS Rifle Stocks available as pre-inlet models for about 30 different rifles or including the HPS Convertible Bedding System with a blank, right and left hand. Here at HPS we can fully bed to a pre-inlet model for you or carry out a full inlet for a v-block and pillar bedding system, fitting trigger guards and accessory rails at the same time.
*
*
*
*
*
£654.00 incl tax
excluding shipping

GRS Laminate Rifle Stocks are available in three versions: 

GRS Hunter - Target Rifle Stock

  • Oiled finish
  • 0.5" Limbsaver/GRS recoil pad
  • Birch Laminate
  • SpeedLock adjustment
  • LOP 33,5 - 36,5 cm
  • Total length 76 cm
  • Fore end width 53 mm
  • 30 mm adjustment LOP and cheekpiece
  • Weighs 1450 grams 
  • Right & Left Hand Available

 GRS X-Eater - F- Class Stock

  • Lacquer finish
  • 0.5" Limbsaver/GRS recoil pad
  • Birch Laminate
  • LOP 35-38cm
  • Height adjustable recoil pad option included
  • Total length 87,5cm
  • Fore end width 74mm
  • Adjustable cheek piece and LOP, both 30MM adjustability
  • Weight 1,85kg 
  • Right Hand Only
  • Black & Blue Only 

GRS Hybrid - Target/F-Class Stock

  • Oiled finish
  • 0.5" limbsaver/GRS recoil pad
  • Birch Laminate
  • SpeedLock adjustmet
  • LOP 35-38cm
  • Total length 88,5cm
  • Fore end width 59mm
  • 30mm adjustment LOP and cheekpiece
  • Heightadjustable recoilpad included!!
  • Weighs 1600grams
  • Right & Left Hand Available

These stocks may be bedded directly to the action or they are also available with:

1) The HPS pre-shaped aluminium bedding block, becoming a structural part of the stock with pillar bedding. Crushing failure and problems with water ingress is then totally prevented. 

2) full length Anschutz accessory rail under the forend. 

The exterior surface of the stocks are fully sealed to give long lasting durability. 

The grip has a six degree angle to the side to aid the shooter into an ergonomically correct position. 

The comb and the recoil pad can be easily adjusted with pushbuttons - the SpeedLock system. 

At the lowest comb position any bolt can be pulled from any system. Both the comb and recoil pad can be fully removed.

Available in a range of colours with Factort inlet options available - Please call to enquire.

Please note - There may be a 12-14 week lead time for delivery.

 

GRS Laminate Rifle Stocks are available in three versions: 

GRS Hunter - Target Rifle Stock

  • Oiled finish
  • 0.5" Limbsaver/GRS recoil pad
  • Birch Laminate
  • SpeedLock adjustment
  • LOP 33,5 - 36,5 cm
  • Total length 76 cm
  • Fore end width 53 mm
  • 30 mm adjustment LOP and cheekpiece
  • Weighs 1450 grams 
  • Right & Left Hand Available

 GRS X-Eater - F- Class Stock

  • Lacquer finish
  • 0.5" Limbsaver/GRS recoil pad
  • Birch Laminate
  • LOP 35-38cm
  • Height adjustable recoil pad option included
  • Total length 87,5cm
  • Fore end width 74mm
  • Adjustable cheek piece and LOP, both 30MM adjustability
  • Weight 1,85kg 
  • Right Hand Only
  • Black & Blue Only 

GRS Hybrid - Target/F-Class Stock

  • Oiled finish
  • 0.5" limbsaver/GRS recoil pad
  • Birch Laminate
  • SpeedLock adjustmet
  • LOP 35-38cm
  • Total length 88,5cm
  • Fore end width 59mm
  • 30mm adjustment LOP and cheekpiece
  • Heightadjustable recoilpad included!!
  • Weighs 1600grams
  • Right & Left Hand Available

These stocks may be bedded directly to the action or they are also available with:

1) The HPS pre-shaped aluminium bedding block, becoming a structural part of the stock with pillar bedding. Crushing failure and problems with water ingress is then totally prevented. 

2) full length Anschutz accessory rail under the forend. 

The exterior surface of the stocks are fully sealed to give long lasting durability. 

The grip has a six degree angle to the side to aid the shooter into an ergonomically correct position. 

The comb and the recoil pad can be easily adjusted with pushbuttons - the SpeedLock system. 

At the lowest comb position any bolt can be pulled from any system. Both the comb and recoil pad can be fully removed.

Available in a range of colours with Factort inlet options available - Please call to enquire.

Please note - There may be a 12-14 week lead time for delivery.

 

Write your own review
  • Bad
  • Excellent